
Before first use
Warning! Refer to the Safety
chapters.
Initial Cleaning
• Remove all accessories and removable shelf
supports (if applicable).
• Clean the appliance before first use.
Important! Refer to the chapter "Care
and cleaning".
Setting the time of day
Set the time of day before you operate
the oven.
The indicator of the Timer function
flashes when:
• you connect the appliance to the electrical
supply.
• there was a power cut.
• the Timer is not set.
Press the + or - button to set the correct time.
Changing the time of day
The flashing stops after approximately five
seconds and then the display shows the time of
day you set.
To change the time press
again and again
until the indicator for the Time of Day function
flashes.
You can not change the time of day if
the Duration
or End function
operates.
Preheating
Set an oven function and maximum temperature
and run an empty oven for 45 minutes, to burn
off any residue from the cavity surface.
Accessories can become hotter than in normal
use. During this period an odour can be
emitted. This is normal. Make sure the room is
well ventilated.
Preheat the two ovens. Heat up one oven at a
time.
12 Cooker user manual
Comentários a estes Manuais