
• To make the burners work correctly,
make sure that the arms of the pan
supports are in the centre of the burner.
•
Be very careful when you replace
the pan supports to prevent the
hob top from damage.
After cleaning, dry the appliance with a soft
cloth.
Removing the dirt:
1. –
Remove immediately: melting
plastic, plastic foil, and food
containing sugar.
–
Stop the appliance and let it
cool down before you clean:
limescale rings, water rings, fat stains,
shiny metallic discolorations. Use a
special cleaner for glass or stainless
steel.
2. Clean the appliance with a damp cloth
and some detergent.
3.
At the end rub the appliance dry
with a clean cloth.
To keep the pan supports in the correct
position, they are mounted on metal pins
located in the rear sides of the hob. To
ensure a better cleaning, pan supports can
be removed from the hob. Lift up the pan
supports keeping them in horizontal
position.
Warning! Avoid lifting the pan
supports at an angle, as this will put
strain on the metal pins. This may
damage the pins and cause them to
break.
Cleaning of the spark
plug
This feature is obtained through a ceramic
ignition candle with a metal electrode. Keep
these components well clean to prevent
difficult lighting and check that the burner
crown holes are not obstructed.
Periodic maintenance
Periodically speak your local Service Force
Centre to check the conditions of the gas
supply pipe and the pressure adjuster, if
fitted.
What to do if…
Problem Possible cause Remedy
There is no spark when lighting
the gas
• There is no electrical supply • Make sure that the unit is
connected and the electrical
supply is switched on.
• Control the fuse. If the fuse is
released more than one time,
refer to a qualified electrician.
• Burner cap and crown are
placed uneven
• Make sure that the burner
cap and crown are in correct
positions.
15
Comentários a estes Manuais