John Lewis JLFSMC613 Manual do Utilizador descarregar pdf (Página 13)

A

B

D

G

E

C

F

H

I

A. Burner cap

B. Burner crown

C. Ignition candle

D. Thermocouple

E. Hob

F. Slots

G. Burner body

H. Location peg

I. Hole

Replacing burner parts

1. Put carefully the burner crown on the burner

body. Let the crown fall freely onto the body.

Do not use force.

Make sure that the hole in the crown is above

the ignition candle.

Make sure that the location pegs are in the

slots in the burner body.

Make sure that you can move the crown a

small distance from side to side.

2. Put the burner cap centrally on top of the

crown (enamel side up).

Make sure that the cap is correctly installed

and you can move the cap from side to side

and front to back.

3. Try to light the burner.

If the burner does not ignite, adjust the crown

and cap again.

Turning the burner off

To put the flame out, turn the knob to the off

position

.

Warning! Always turn the

flame down or switch it off

before you remove the pans

from the burner.

Lid Safety Device

Lid has safety device, which cuts off the gas

supply for the hob. It works only when the lid is

closed.

Warning! Always use the

knob for the hob to switch off

a burner. Do not use the lid as

a cut-off device.

Cooker User Manual 13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 43 44

Comentários a estes Manuais

Sem comentários