John Lewis JLBIIH603 48P Manual do Utilizador descarregar pdf (Página 32)

Something Not Working

If the hob is not working correctly, please car-

ry out the following checks, before contacting

your local Service Force repair agent.

In the event of any other fault codes that arise,

disconnect the appliance from the electrical

supply for a few seconds (take out the fuse

from the housing wiring system). If the fault

code is displayed again, please call your local

Service Force repair agent and report the fault

code.

IMPORTANT:

If you call out an engineer to

a fault listed below, or to repair a fault caused

by incorrect use or installation, a charge will

be made even if the appliance is under guaran-

tee.

Problem Possible cause Solutions

The appliance cannot be switched

on or is not operating

More than 10 seconds have

passed since the appliance was

switched on

Switch the appliance on again.

The lock is switched on Switch off the lock (See the sec-

tion “Locking/unlocking the con-

trol panel”)

The child safety device is

switched on

Deactivate child safety device

(See the section “Child safety de-

vice”)

Several sensor fields were

touched at the same time

Only touch one sensor field

Safety cut-out has been triggered Remove any objects (pan, cloths,

etc.) that are lying on the control

panel. Switch the appliance on

again

The cooking zones automatically

reduce the cooking level to

The sensor fields are partly cov-

ered by a damp cloth or with liq-

uid

Remove the cloth or the liquid.

Reset the cooking level required.

The residual heat indicator is not

displaying anything

The cooking zone was only on for

a short time and is therefore not

hot

If the cooking zone is supposed

to be hot, call your local Service

Force Centre.

1 2 ... 27 28 29 30 31 32 33 34 35 36

Comentários a estes Manuais

Sem comentários

John Lewis JLBIIH603 48P Manual do Utilizador Página 32

Comentários a estes Manuais

Manuais e produtos relacionados com Fogões John Lewis JLBIIH603 48P