John-lewis JLDWS1202 Manual do Utilizador

JLDWS1202DishwasherInstruction manual

10Adding Dishwasher SaltTo decalcify the water softener, it must be filled up with dishwasher salt. Use only special salt suitable for domestic dishwa

11Filling Up with Rinse AidRinse aid causes the rinse water to flow easily from the crockery leav-ing gleaming dishes and glassware. If you do not use

12Setting the Amount of Rinse Aid Required3 Only change the amount dispensed, if smears, milky spots (reduce the amount) or dried on water spots (incr

134. Pressing function button 2 activates and deactivates the rinse aid dis-pensing function.5. Once the multi-display is indicating the required se

14In Daily UseLoading Cutlery and Dishes1 Sponges, cleaning cloths and any other objects that can absorb water must not be washed in the dishwasher. P

15Loading cutlery1 Warning: Sharp knives and other items of cutlery with sharp edges must be laid in the cutlery rack or in the upper basket to avoid

16Pots, Pans, Large PlatesLoad larger and heavily soiled dishes and pans in the lower basket.(Max. diameter for plates 29 cm). To make it easier to lo

17• The cup racks can be folded up out of the way for tall crockery items.• Lay or hang wine and brandy glasses in the slots in the cup racks.• For gl

18Adjusting the Height of the Upper Basket3 The height of the baskets can also be adjusted when they are loaded. Raising/Lowering the Upper Bas-ket 1.

19Adding DetergentDetergents remove the dirt from dishes and cutlery. The detergent must be added before the cycle starts.1 Only use detergent intend

2Dear Customer,Please read this user information carefully and keep it to refer to later.Please pass the user information on to any future owner of th

20Concentrated detergentsToday’s detergents for dishwashers are almost exclusively low-alkaline concentrated detergents with natural enzymes in tablet

21Selecting the Dishwashing Cycle (Cycle Table)Dishwashing-cycleSuitablefor:Type of soilingProgramme sequenceConsumptionvalues1)1) The consumption val

22Starting a Dishwashing Cycle1. Check that the spray arms can turn freely.2. Turn the water tap on fully.3. Press the ON/OFF button.4. Select the des

23Setting the Delay Timer3 With the delay timer you can delay the start of a dishwashing cycle for between 1 and 19 hours.1. Press the Delay Timer but

24Switching Off the DishwasherWhen the dishwasher cycle has ended, the dot-shaped light signal be-low the door of the appliance goes out.If the acoust

25Cleaning the Filters3 The filters must be regularly checked and cleaned. Dirty filters will spoil the wash results.1. Open the door and remove the l

26What to do if...Remedying Small MalfunctionsIn the event of a fault, the light signal at floor level flashes.If the acoustic signal is activated, wa

272 short warning tones continuously repeated can be heard.The cycle indicator for the selected dishwashing cycle is flashing,fault code Å20 is dis-p

28If the Dishwashing Results are not SatisfactoryThe dishes are still dirty.• The wrong dishwashing cycle was selected.• The dishes were loaded is suc

29Disposal2Packaging materialThe packaging materials are environmentally friendly and can be recy-cled. The plastic components are identified by marki

3ContentsOperating Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Safety . . . . . . . . . . . . . . . . . . .

30Notes for Test InstitutesTesting in accordance with EN 60704 must be carried out with the appliance fully loaded and using the test cycle (see “Cycl

31 Lower basket with cutlery basket *)Cutlery basket *) If there are cup racks in place on the lefthand side or if beer glass holders are in place, re

32Installation and Connection Instructions1 Safety Information for the Installation• Only transport the dishwasher in an upright position, otherwise s

33Installing the Dishwasher• The dishwasher must be installed on a firm floor and adjusted to en-sure that it is stable and level in all directions.•

34Free-standing appliances1 If the dishwasher is installed directly next to a cooker, a heat-insulat-ing, non-flammable panel (laminated with aluminiu

35Connecting the DishwasherConnecting to the water supply • The dishwasher must only be connected to a cold water supply.• The dishwasher must not be

36Water drainageDrain hose1 The drain hose must not be kinked, crushed or entangled.Connecting the drain hose:– Maximum permitted height: 1 metre.– Mi

37Electrical ConnectionAny electrical work required to install this appliance should be car-ried out by a qualified electrician or competent person.1

38Connecting systemsThe water inlet hose, drain hose and the mains cable must all be con-nected to the side of the dishwasher as there is no space for

39Service and Spare PartsIn the event of your appliance requiring service, or if you wish to pur-chase spare parts, please contact our extended warran

4Operating Instructions1 SafetyPrior to using for the first time• Follow the ”Instructions for installation and connection”.Correct Use• The dishwashe

John Lewis partnership171 Victoria StreetLondon SW1E 5NNwww. johnlewis.com822 612 398-00-011204-02 Subject to change without notice

5General Safety• Repairs to the dishwasher are only to be carried out by qualified/au-thorised service engineers. • When the dishwasher is not being u

6Diagram of Appliance Control PanelTo use the appliance, always open the dishwasher door first. The ON/OFF button is used to turn the dishwasher on

7 The Programme buttons are used to select the desired dishwashing cy-cle.Function buttons: In addition to the pre-set dishwashing cycle, the followi

8Prior to Using for the First Time1. Set the water softener2. Fill up with dishwasher salt3. Fill up with rinse aid3 If you wish to use 3in1 detergent

93 If the LED indicator of only one programme button is illuminated, this wash programme has been activated. The wash programme must be deselected:Pre