John Lewis JLDW1221 Manual do Utilizador descarregar pdf (Página 8)

Energy save button

This function decreases the temperature in the

drying phase. The power consumption is

reduced by 25%.

Dishes can still be wet at the end of the

programme when you open the appliance door.

Refer to ''Washing programmes'' to see which

washing programmes can be combined with this

function.

Press this button to activate the function. The

related indicator comes on.

Delay start buttons

Press one of these buttons to delay the start of

the washing programme from 1 to 24 hours.

Refer to 'Select and start a washing programme'.

The display

The display shows:

• The water hardness adjustment of the water

softener.

• The remaining time of the programme in

progress.

• The activation of the rinse aid dispenser.

• The end of a washing programme (the display

shows a zero).

• The countdown of the delay start.

• The alarm codes related to a malfunction of

the appliance.

Function buttons

The following operations can be done with

these buttons:

• The electronic setting of the water softener.

• The cancellation of a washing programme in

progress.

• The activation of the rinse aid dispenser.

Indicators

In addition to the programme indicators other

indicators help you in the use of your appliance.

Multi tab

The indicator comes on when you

activate the Multi tab function.

Energy

save

The indicator comes on when you

activate the Energy save function.

Rinse aid

1)

The indicator comes on when the

rinse aid has run out.

Salt

1)

The indicator comes on when the salt

has run out.

The salt indicator can remain on for a

few hours after that salt has been

replenished (assuming the appliance

remains switched on). The operation

of the appliance is not affected.

1) The salt and rinse aid indicators are never on while a

washing programme is running even if filling with salt and/

or rinse aid is necessary.

Setting mode

The appliance must be in setting mode

for these operations:

• To start a washing programme.

• To start a delay start.

• To adjust electronically the level of the water

softener.

• To activate the rinse aid dispenser.

Switch on the appliance. The appliance is

in setting mode when:

• All the programme indicators come on.

Switch on the appliance. The appliance is

not in setting mode when:

• Only one programme indicator comes on.

• The display shows the time of the washing

programme or of the delay start.

– Cancel the programme or the delay start

to go back to the setting mode. Refer to

'Select and start a washing programme'.

8 Dishwasher user manual

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 39 40

Comentários a estes Manuais

Sem comentários