John Lewis JLBIDW1201 Manual do Utilizador descarregar pdf (Página 18)

Select and start a washing

programme

Starting the washing

programme

1. Switch on the appliance. Make sure that

the appliance is in setting mode.

2. Select a washing programme. Refer to

'Washing programmes'.

• The related programme indicator

comes on.

3. Close the appliance door, the washing

programme starts automatically.

Warning! Interrupt or cancel a

washing programme in progress only

if it’s absolutely necessary. Hot steam

may escape when the appliance door

is opened. Open the door carefully.

Interrupting a washing

programme in progress

1. Open the appliance door. The washing

programme stops.

2. Close the appliance door. The

programme continues from the point at

which it was interrupted.

Cancelling a washing

programme in progress

Press and hold the Start/Cancel button until

the indicator of the programme in progress

goes off and the End indicator starts to flash.

The appliance is now in setting mode.

Make sure that there is detergent in

the detergent dispenser before you

start a new washing programme.

End of the washing

programme

When the washing programme is

completed, an intermittent acoustic signal

sounds.

• The End indicator is on.

Switch off the appliance.

It is recommended that the appliance

is unplugged and the water tap

turned off when the washing

programme is completed.

Unloading the appliance

• Hot dishes are sensitive to knocks. The

dishes should therefore be allowed to

cool down before removing from the

appliance.

• Empty the lower basket first and then the

upper one; this will avoid water dripping

from the upper basket onto the dishes in

the lower one.

18

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 31 32

Comentários a estes Manuais

Sem comentários